Error code E05-32

If your oven has error E05-32, there is a problem with the button. This error code typically occurs when the button has been held down for too long or the button has become stuck. If the button is jammed, loosening the button will solve the problem.

Error code E05-11

If your oven has error E05-11, there is air in the systems.

1. Confirm the error by using the ON/OFF button (if E511 still appears on the display).
2. Turn on the appliance.
3. Select top/bottom heat at 80 °C and add steam.
4. End the process after about 5-10 minutes.
5. Choose steam at 100 °C or reheat at 120 °C (depending on the appliance).
6. Exit again after about 5-10 minutes. If E511 occurs again, the process is repeated one more time.

Error code E010D

If your oven has error E010D, a communication error is present. This error code is typically resolved by disconnecting the oven from power for 30 minutes and reconnecting it afterwards.

Error code E106

If your oven has error E106, the door does not lock during self-cleaning. This can be solved by replacing the door lock.

Error code ER0

If your oven has error ER0, a communication error is present. This error code is typically resolved by disconnecting the oven from power for 30 minutes and reconnecting it afterwards.

Error code ER1

If your oven has error ER1, there is a fault with the PT5000 temperature sensor. This error code is resolved by replacing the thermostat.

Error code ER2

If your oven has error ER2, there is a problem with the power connection. This error can occur after the stove or oven has been disconnected from the power supply. check if the mains cable.

Error code ER3

If your oven has error ER3, the oven has detected an overheating. This can be solved by replacing the cooling fan.

Error code ER4

If your oven has error ER4, there is a fault with the PT5000 temperature sensor. This error code is resolved by replacing the thermostat.

Error code ER6

If your oven has error ER6, the oven door is open. This error can be resolved by replacing the door lock.

Error code ER7

If your oven has error ER7, the oven door is open. This error can be resolved by replacing the door lock.

Error code ER9

If your oven has error ER9, this error code can typically be resolved by disconnecting the oven from the power supply for 30 minutes and reconnecting it afterwards.

Error code ER11

If your oven has error ER11, there is an error with the button. This error code typically occurs when the button has been held down for too long or the button has become stuck. If the button is jammed, loosening the button will solve the problem.

Error code ER15

If your oven has error ER15, the temperature is too high. This error code occurs when the recorded temperature exceeds 380 degrees. This is typically due to the pyrolysis program being started. The error code should disappear after the oven has finished the program and has cooled down.